Liquid Screed Wokingham

Liquid Screed Wokingham This renovation project is in Finchampstead, Wokingham.  The specification was a liquid screed to cover the water underfloor heating system.  High thermal conductivity was a high priority, and Axtell Concrete supplied Gypsol Classic liquid flowing screed. The project size was 80m2 at a depth of 55mm. Thank you, Murray & Krzysztof, for [...]

By |2021-08-31T18:04:31+00:00August 31st, 2021|Screed Case Studies, Screed Products, underfloor heating installation|Comments Off on Liquid Screed Wokingham

Ask Andy “Supaflo Winter Drying Times”

Ask Andy "Cemex Supaflo Winter Drying Times" Thank you Daren for your Cemex Supaflo Winter Drying Times Question: "what is the drying times calculation for a 50mm supaflo screed in an unheated internal space using winter temps and RH?" Watch Andy's video to find out his answer: https://youtu.be/60NMcBSLwZQ Would you like to find out [...]

By |2021-02-11T18:37:17+00:00February 11th, 2021|liquid floor screed, Screed Case Studies|Comments Off on Ask Andy “Supaflo Winter Drying Times”

Ask Andy “Is 80mm too thick for a liquid screed?”

Ask Andy "Is 80mm too thick for a liquid screed?" Thank you Lucy for your liquid screed Question: "Is 80mm too thick for a liquid screed?" Watch Andy's video to find out his answer (click below): Would you like to find out more about screed?  Why not view our Knowledge Page If you have any [...]

By |2021-07-12T21:34:14+00:00February 10th, 2021|liquid floor screed, Screed Case Studies|Comments Off on Ask Andy “Is 80mm too thick for a liquid screed?”

Ask Andy “Gypsol Classic Drying”

Ask Andy "Gypsol Classic Drying" Thank you Charlotta for your Gypsol Classic Drying Question: "We have used Gypsol classic on our first floor in a new build timber frame house. Unfortunately we don’t think care has been taken to make sure the screed is properly dry. Tiling has started but is now on hold. Please [...]

By |2021-02-06T11:55:49+00:00February 6th, 2021|liquid floor screed, Screed Case Studies|Comments Off on Ask Andy “Gypsol Classic Drying”